Concept rendering of a yacht aft deck laid in hardwood, with a table and seating

Yacht and boat decking, a traceable alternative to teak.

Yacht & Boat Decking

Tropical hardwoods recovered from forests submerged beneath reservoirs, for laid decks, saloon joinery and cabins. Marine decking with a documented origin: a traceable alternative to Burmese teak for yards and boat builders in the UK and the US, with nothing newly felled and every batch documented from the lake to the yard.

Why submerged hardwood works as marine decking

Built for life at sea

The collection's tropical hardwoods keep their technical performance after decades beneath the water, which is what makes several of them suitable for marine use. Our concept studies show Saint Martin Jaune, known elsewhere as Angelim Pedra, as a laid deck. Marine suitability is confirmed species by species, with technical data available on request. Photograph: Triton Collections.

Saint Martin Jaune

One of the collection's Rare species, prepared to order, part of the 2027 launch palette and the species shown in our concept studies for laid decks. Shown: Saint Martin Jaune.

Hard and stable on deck

Triton reports greater hardness and stability in its submerged timber, qualities that count on a deck exposed to the weather and constant use. In the words of Elodie Delonca of Triton, these timbers are "naturally durable, mechanically resistant". Shown: concept rendering.

Saloons and cabins

Below deck, Chawari can carry the joinery of a saloon, and the same timber can continue into cabins, doors and furniture, so the whole interior shares one material. Shown: concept rendering, Chawari saloon joinery.

Preserved by the water

Below roughly five metres (about 16 feet), the reservoir is virtually free of oxygen, so the fungi that cause decay cannot work and the timber hardly degrades. Each species and batch is still graded, dried and technically reviewed before it goes to a yard. Shown: concept rendering.

Teak decking and its alternatives

Why yards are looking beyond teak

Teak has long been the benchmark for boat decking: the TDCA rates it Class 1, very durable, with small movement. The classic deck teak is Burmese, from Myanmar, and in 2021 the US, the UK and the EU each sanctioned Myanma Timber Enterprise, the state body that controls the country's timber trade; in the EU it is now illegal to import timber from Myanmar directly. Synthetic teak is a plastic alternative. Submerged tropical hardwood is real timber with a documented origin, and its marine suitability is confirmed species by species.

Provided by Triton Timber

Traceable, with nothing newly felled

Every deck plank comes from trees that were already lost beneath the water, so no living forest is cut for the boat. The timber is harvested under a 25-year contract with the national forest office, and each batch ships with a Certificate of Guarantee of Origin, so a yard can show where the deck came from, in the UK or the US.
Image

Discover the species, formats and finishes

Download the catalogue for the full palette and the story behind the collection, or request samples for your yard.

Yacht & Boat Decking FAQs

Is submerged wood an alternative to teak?

It offers a traceable alternative to Burmese teak for decks and interiors. Each species has its own performance, so suitability for marine use is confirmed species by species.

Can Burmese teak still be used?

It is hard to do with confidence. In 2021 the US, the UK and the EU sanctioned Myanma Timber Enterprise, which controls Myanmar's timber trade, and EU businesses can no longer import timber from Myanmar directly. Older stock is still offered, but its legality is difficult to prove, which is why yards ask for documented alternatives.

Which species suit a yacht deck?

Our concept studies show Saint Martin Jaune as a laid deck. Marine suitability depends on the species, and technical data is available on request for each one.

Is it suitable for smaller boats as well as yachts?

The same rule applies to any vessel: marine suitability is confirmed species by species, with technical data on request, and the deck is specified with the yard or boat builder. Start with samples of the species shown in our concept studies.

Can the same timber be used on deck and below?

Yes. A species can run from the deck into saloon joinery, cabins and furniture, so the whole vessel shares one material, subject to volume, grade and lead times.

Why hasn't the wood rotted under water?

The deep water of the reservoirs holds almost no oxygen: below roughly five metres (about 16 feet) the fungi that cause decay cannot work, so the trunks hardly degrade. Wood from shallow or fluctuating water decays and is not used, and every batch is graded, dried and technically reviewed before it reaches a yard.

Do you also supply decking for terraces and pools?

Yes. Our hardwood decking page covers terraces, pool decks and roof gardens, with the Popular species available in volume.

I am a yacht designer or builder. How do we start?

Apply now for early specification benefits for decks and interiors. Start with material samples and a conversation with the Re:claimed team.

How is the origin documented?

Each batch ships with a Certificate of Guarantee of Origin, and the timber is harvested under a 25-year contract with the national forest office. That documentation can support BREEAM Mat 03 responsible-sourcing evidence; credits are confirmed by each project's assessor.

Do you supply projects in the US?

Yes. The collection is offered to projects in both the UK and the US, and US projects are supplied from the UK through Re:claimed. Start with samples or a presentation by video call; volume, grade, lead times and delivery are confirmed for each project at specification.

When can I order?

The collection is being introduced in the UK and the US now, with first projects delivered from 2027. Reservations for 2027 projects are open: request samples, book a presentation or download the catalogue.

Reserve your timber for 2027

Discuss your project

Volumes are finite and allocated project by project. Request samples, book a presentation by video call or at our Mayfair showroom in London, or tell us about your vessel. We work with clients in the UK and the US.

By Appointment Only

23,24 Berkeley Square, W1J 6HE

[email protected]

By Appointment Only

Elena Padovan, Vice President

[email protected]

By Appointment Only

Unit 6b Battersea Road, Heaton Mersey
Cheshire, SK4 3EA

[email protected]